Troubleshooting 89
❏ Run the head cleaning utility to clear any clogged ink nozzles.
& See “Cleaning the Print Head” on page 67.
❏ Use ink cartridges within six months after opening the packages.
❏ Use genuine Epson ink cartridges.
❏ Check the H Ink light. If the light is on, replace the appropriate ink cartridge.
& See “Replacing an Ink Cartridge” on page 62.
❏ Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See “Publishing Discs” on page 23.
Vertical Misalignment
❏ Run the print head alignment utility.
& See “Aligning the Print Head” on page 69.
❏ Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See “Publishing Discs” on page 23.
Banding
❏ Make sure the printable side of the disc is face up in the stacker.
❏ Run the head cleaning utility to clear any clogged ink nozzles.
& See “Cleaning the Print Head” on page 67.
❏ Make sure the label type selected in the printer driver is appropriate for the type of disc
loaded in the product.
& See “Publishing Discs” on page 23.
❏ Due to the variation in the quality of discs, print results using the same type of discs
from the same data may not be the same.
Incorrect or Missing Colors
❏ Adjust the color settings in your application or in your printer driver settings.
Check the Main window.
See the printer driver online Help for details.
To Next Page
Loading...
Need help?
General
