Using Your Software 15
Setting a Working Folder and Log
After the software installation, create a Working Folder on the hard disk for the disc
publishing operation. You can also set for log files. Log files are useful for service and
support of the product.
Note:
These settings are reflected for all the CD/DVD/BD publishers registered (except for the PP-100N).
1. Select Start ( in Windows 7 or Windows Vista) - All Programs (or Programs) -
EPSON Total Disc Maker - EPSON Total Disc Setup.
The EPSON Total Disc Setup will start.
2. Select Common Setting for Publishing from the Tool menu.
The Common Setting for Publishing screen will appear.
3. Click Browse to select a folder to create a Working Folder.
Note:
Select a drive with sufficient free space. For information on the necessary HDD space, see the
following section.
& See “System Requirements” on page 13.
4. Check the checkbox for Save publication log if you want to save the usage history of
the product.
Note:
When the log files saved in the computer exceed 200MB, the older ones will be deleted (starting
with the oldest one) to make room for new ones.
5. Click OK.
To Next Page
Loading...
Need help?
General
