Troubleshooting 80
Error associated with ink
Lights
Conditions/Remedies
Power Busy Error Ink
Stacker
1 2 3
Ink low
Obtain a replacement ink cartridge. To determine
which cartridge is low, check the ink cartridge
status.
See “Checking the Ink Cartridge Status” on page
59.
The ink has reached its replacement time or it is
not installed correctly.
Replace the ink cartridge or reinstall it.
If the ink cartridge is not recognized even if it is
installed correctly, there may be dirt on the green
circuit board. Wipe it with soft cloth and install it
again.
The product will stop operation before ink is
completely empty in order to maintain print head
quality. Therefore, some ink will be left in the ink
cartridge.
It is recommended to use a genuine ink cartridge.
Ink cartridge not fully inserted
All Ink lights are on.
Check ink cartridges and make sure they are all
fully inserted.
To Next Page
Loading...
