27
Chapter 2 Setup
2
Dip Switch Settings
Use the dip switch to set the communication conditions and whether or not to perform self test when the power
is turned on.
Settings by connection patterns
Set the dip switch for each connection pattern.
Connection Pattern Settings
USB (Self Powered/Bus Powered) When using the followings, set the communication speed to 115200 bps.
• EPSON OPOS ADK
• EPSON OPOS ADK for .NET
• EPSON JavaPOS ADK
Serial (Stand-Alone) Match the serial communication settings for the computer and this product.
Serial (Pass-through) Match the serial communication settings for the computer, printer and this
product.
Serial (Y-type) Match the serial communication settings for the computer, printer and this
product.
Serial (USB controlled) Set the communication speed to 19200 bps.
Serial (USB/Ethernet controlled) Set the communication speed to 19200 bps.
TM Intelligent Printer (ePOS-Device) Match the serial communication settings for the TM intelligent printer’s EPSON
TMNet WebConfig and this product.
TM-DT Series (Windows) Match the serial communication settings for the TM-DT Series and this product.
To Next Page
Loading...
