Epson DM D110 - Connecting; USB (Self Powered)

To Next Page

To Previous Page

Chapter 2 Setup

Connecting

This section explains how to connect to the system by connection patterns.

The illustrations used here are for DM-D110/DP-110, but you can still use them as your reference for DM-

D210/DP-210.

USB (Self Powered)

CAUTION

When attaching or removing the cables, make sure you turn off the power to the customer dis-

play and the system.

• When connecting or removing the AC adapter to the DC cable connector, make sure that the

AC adapter’s power cord is unplugged from the outlet.

• When connecting or removing the DC cable of the AC adapter, make sure you hold the con-

nector part. If you pull the cable part, you may damage the cable.

• DM-D110

• DM-D210

USB cable • Remove the cap

• Attach the ferrite core

• Connect to the computer

RS-232 cable • Remove the cap

• Connect to the DM-D connector of DP-110/DP-210

• DP-110

• DP-210

DM-D connector Connect the RS-232 cable of DM-D110/DM-D210

Power supply connector Connect the AC adapter

Extension power cable

connector

Not used

Computer interface connector Not used

Printer interface connector Not used

JP1 Not setting

JP2 Not setting

DM-D110/DM-D210

DP-110/DP-210

USB cable

RS-232 cable

Ferrite core

AC adapter

Computer

Power cord

Other manuals for Epson DM D110