66
Chapter 2 Setup
2
DP-503 (TM-H5000II)
Checking the accessories
Check the DP-503 parts. When attaching it on the TM-H5000II, use the following parts.
Installing to the TM-H5000II
1
Pass the cable for this product through support C and attach support C to this
product. When using support B for extension, insert the tab on support B into the
hole on support C until you feel it click.
• The illustrations used here are for DM-D110, but you can still use them as your reference for
DM-D210.
• Because the illustration used here is for the RS-232/USB model, there are 2 cables. The USB
model and RS-232 model have 1 cable.
Base
Fixing screws
[DP-503 parts]
Support C
Support B for extension
When using support
B for extension
To Next Page
Loading...
