Epson DM D110 - Tm-H6000 V)

38
Chapter 2 Setup
2
DP-502 (TM-H6000V)
Checking the accessories
Check the DP-502 parts. When attaching to the TM-H6000V, use the following parts.
• Set DIP switch 2-2 on the printer to "ON".
• Set "Selection of interface using the customer display" on the printer according to the inter-
face that is used.
Stopper
Fixing screw
for stopper
Fixing plate B
Fixing screws for rubber
feet (small)
Rubber feet (small)
Fixing screws for fixing plate B
Support C
Support B for extension
Fixing plate A
Installation Guide
Angle fixing
screw