Epson DS-560 - Wi-Fi (Wireless) Network Basics; Infrastructure Mode (to Communicate through the Access Point)

Wi-Fi (Wireless) Network Basics
There are two types of Wi-Fi connection; Infrastructure mode (to communicate through the access point) and direct
Wi-Fi connection (to communicate directly with devices without using an access point).
Infrastructure mode (To communicate through the access point)
In the Infrastructure mode, both wireless and wired computers can communicate through an access point (such as
wireless router) to send data to the network interface.
a. product
b. Wireless router (or access point)
c. Computer with Wi-Fi interface (built-in or added via USB/PC card and so on)
d. Computer with LAN port or Wi-Fi interface
e. Ethernet cable (if you connect the computer and the wireless router directly)
DS-560 Network Guide
Introduction
4