G
Wipe off any stains on the four rollers on the bottom.
Hold down the ] button for at least two seconds. Press the ] button several times to rotate the roller and wipe
off any stains on the roller.
H
Turn off the product. Unplug the AC adapter from the product.
I
Wipe off any stains on the glass surface.
Make sure that dust does not build up on the glass surface. Dust can cause spots and straight lines in your
scanned images.
c
Important:
Do not spray glass cleaner directly on the glass surface.
J
Close the Scanner cover.
Note:
If the case is very dirty, dampen a soft cloth with water and wring it well, and then wipe off any remaining stains.
After that, use a soft dry cloth to wipe the case.
DS-860 User’s Guide
Maintenance
40
To Next Page
Loading...
