Epson DS-860 - Replacing the Roller Assembly Kit

Replacing the Roller Assembly Kit
You need to replace the parts on the Roller Assembly Kit after scanning every 200,000 times.
Note:
Make sure you replace all of the rollers at the same time.
Removal part Part number Number of scanning
Roller Assembly Kit B12B813581 200,000
To replace the Roller Assembly Kit, follow the steps below.
c
Important:
Do not touch the surface of the roller.
A
Turn off the scanner.
B
Unplug the AC adapter from the product.
C
Pull the cover open lever and open the scanner cover.
D
Press the hook on the right side of the pickup roller cover, and then open the cover.
DS-860 User’s Guide
Maintenance
41