18
2.
2.
2.
2. Clean
Clean
Clean
Clean Option:
Option:
Option:
Option:
1) Click to set the carriage go back to the flash jetting position for jetting during printing;
2) Print pass is to set every XX pass, carriage go back to the flash jetting position for jetting;
3) Clean Mode is Flash Jetting;
4) There are three options in Clean Time, Fast means non - stop jetting, Normal means jetting for 0.5s ,
, Long means jetting for 1s.
3.
3.
3.
3. Eclosion(Feather
Eclosion(Feather
Eclosion(Feather
Eclosion(Feather function):
function):
function):
function):
To blur the pass line, feather pass edge.
1) Option: Enable/Disable the feather function; 2) Type of Eclosion; 3) Value of Eclosion.
4.
4.
4.
4. Color
Color
Color
Color Bar:
Bar:
Bar:
Bar:
1) Distance (mm): Setup for distance between the color bar and the picture;
2) Width (mm): Setup for the width of the whole color bars ;
3) Setup for the position of color bar (in the right/left/both side of the image ).
5.
5.
5.
5. Smart
Smart
Smart
Smart Print:
Print:
Print:
Print:
Set up for automatically skip white.
6.
6.
6.
6. Auto
Auto
Auto
Auto feed
feed
feed
feed after
after
after
after printed:
printed:
printed:
printed:
Set up for automatically feed media after print ing (mm).
To Next Page
Loading...
