To Next Page

To Previous Page

Note: 1. After turn ing on the machine till the carriage moving back to home position, the processing indication

shows as: A. – 1 – 4 – 0.

Main board and Head board show the same indication .

2. The two power cable plug both are 20Pin.

3. In normal state, RUN LED is blinking; LINK LED is on; BUSY LED is on （ On Main board, when

carriage moves, BUSY LED is on, otherwise it is off ） ;ERROR LED is off(only on when there is problem).

Chapter

Chapter 5.

Software

Software Installation

Installation

This software consist of printer driver, printing adjustment and picture printing functions.

Please follow the following steps to install the software:

1) Turn on the computer till the system is ready, copy UDT_PrintExp

UDT_PrintExp

UDT_PrintExp to your computer, un-zip to get

UDT_PrintExp

UDT_PrintExp folder. Start to install:

2) Double click to install

Epson DX5 X 2 User Manual

Questions and Answers: