Need help?Do you have a question about the Epson DX5 X 2 and is the answer not in the manual?
General| Brand | Epson |
|---|---|
| Model | DX5 X 2 |
| Category | Printer Accessories |
| Language | English |
Details minimum hardware specs for the printer.
Details enhanced hardware specs for optimal performance.
Step-by-step guide for setting up the printer.
Overview of technical specifications and capabilities.
Identification and labeling of the printhead board parts.
Overview of the main board's circuitry and ports.
Guide for installing the main printer software package.
Steps to install the driver using the Found New Hardware Wizard.
Introduction to the software, printer selection, and definitions.
Explanation of the icons and tools in the software's toolbar.
Details on the printer status, jetting, and carriage position indicators.
How to print and check nozzle condition.
Adjusting vertical position between printheads (Cases 1 & 2).
Handling cases where printheads are perfectly aligned.
Step-by-step guide for physically aligning printheads.
Methods for adjusting carriage plate for vertical alignment.
Methods for correcting printhead overlap or separation.
Final adjustments for printhead vertical alignment.
Aligning colors for high-quality image printing.
Correcting differences in print speed and direction.
Adjusting step offset for print quality and banding.
Explanation of printhead voltage adjustment range.
Overview of Flash Jetting, Clean Option, Eclosion, Color Bar, Smart Print, Auto feed.
In-depth descriptions of Clean Option, Eclosion, Color Bar, Smart Print, Auto feed.
Basic cleaning methods for the printer.
Specific steps to resolve clogged nozzles.
Routine cleaning and lubrication of moving parts.
Daily checks and cleaning before/after use.
Procedures for shutting down for 3-7 days.
Procedures for shutting down for over a week.
Detailed steps for cleaning with flush during long shutdown.
Ink filling process and sealing ink tubes after cleaning.
Final steps involving cartridges and carriage position.
Troubleshooting common startup and repositioning errors.
Diagnosing issues with carriage repositioning or direction.
Resolving errors during printing like position or interruption issues.
Addressing color missing, banding, or carriage movement problems.
Chart detailing print speed (m²/h) across different modes.
To Next Page
