Epson DX5 X 2 User Manual

14
Adjust method:
Keep adjust ing until the printhead status looks like the following diagram:
Note: after finish adjustment, print vertical status to check again and make sure both printheads ’ vertical are
aligned.
2
nd
printhead
2
nd
printhead
Loosen the 3 screws on the carriage plate:
adjust both screw at same time, to move the 2
nd
printhead forward and backward
There is no overlap or
separate between two
printhead

Epson DX5 X 2 Specifications

General

Brand	Epson
Model	DX5 X 2
Category	Printer Accessories
Language	English