14
Projecting Movies from a Computer (Movie Sending Mode)
In Movie Sending Mode, movie files can be sent directly to a projector.
As a result, a movie can be projected much more smoother than when
it is being sent from an application running on a PC.
Also, because the audio is sent at the same time as the video, there is
no need for an audio cable between the computer and the projector.
When you select multiple files, they are played back repeatedly and in
sequence.
Supported file types
The file types supported by Movie Sending Mode are listed in the
following table.
Files to which DRM (Digital Rights Management) is applied
cannot be projected.
Playing back a movie
A
Click the button on the toolbar.
The projector selection screen is displayed.
B
Select the destination projector for Movie Sending
and click the "OK" button.
The "Movie Sending Mode" screen appears.
C
Click the "Select file" button.
q
• Movie Sending Mode is valid for one projector only. It is
not possible to apply Movie Sending Mode to more than
one projector.
• Depending on the communication method and the
available reception, the image and sound may skip or stall.
File type
(extension)
Notes
.mpg MPEG2
The reproducible audio format is MPEG1 Layer 1/
2. Linear PCM and AC-3 audio cannot be played
back. MPEG contents with no sound can be played
back.
Procedure
To Next Page
Loading...
Need help?
General
