To Next Page

To Previous Page

Removing USB devices

After finishing projecting, remove USB devices from the projector. For devices such as digital cameras or hard disks, turn off the device and then remove it from

the projector.

Connecting External Equipment (EB-1880/EB-1870/EB-1850W only)

You can output images and audio by connecting an external monitor or speaker.

When outputting images to an external monitor

Connect the external monitor to the projector's Monitor Out port using the cable supplied with the external monitor.

When outputting audio to an external speaker

Connect the external speaker to the projector's Audio Out port using a commercially available audio cable.

• If you set Standby Mode to Communication On, you can output images to an external monitor even if the projector is in standby mode.

s Extended - Standby Mode p.81

• Only analog RGB signals from the Computer1 port can be output to an external monitor. You cannot output signals input from other ports or component video

signals.

• Setting gauges for functions such as Keystone, Configuration Menu, or Help screens are not output to the external monitor.

• When the audio cable jack is inserted into the Audio Out port, audio stops being output from the projector's built-in speakers and switches to external

output.

Connecting Equipment