EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 101 Revision A
DISASSEMBLY PROCEDURE
EB-E01/X06/W06/E10/X51/W51/W52
1. See Flowchart (p70) and remove all parts up to the component below from
the projector.
Upper Case (Assy) (p80)
2. Disconnect the connectors from the "MA Board Assy".
3. Remove the six screws ( / ) and remove the "MA Board Assy".
Screws
MA Board Assy
C.P.(S-P1)SCREW,2.5X6,F/ZN-3C
C.B.P-TITE SCREW,2.5X10,F/ZN-3C
To Next Page
Loading...
