Epson EB-E01 - Network Menu - Wireless LAN Menu

EB-E01 series Disassembly and Assembly INTERNAL USE ONLY
SEIKO EPSON 140 Revision A
3.4.4 EX Fan
PART NAME
 EX Fan
DISASSEMBLY PROCEDURE
1. See Flowchart (p70) and remove all parts up to the component below from
the projector.
MA Board Assy (p100)
2. Remove the two screws ( ) and remove the "Upper EX Duct".
3. Remove the "EX Fan".
EX Fan
Upper EX Duct
C.B.P-TITE SCREW,2.5X10,F/ZN-3C