EasyManuals Logo

Epson EB-E01 User Manual

Epson EB-E01
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #119 background imageLoading...
Page #119 background image
Crestron Connected Support
119
If you are using the Crestron Connected network monitoring and control
system, you can set up your projector for use on the system. Crestron
Connected lets you control and monitor your projector using a Web browser.
a
You cannot use the Message Broadcasting feature in Epson Projector
Management when you use Crestron Connected.
If you set the Standby Mode setting to Communication On, you can
control the projector even if the projector is in standby mode (when
the power is off).
s ECO > Standby Mode > Standby Mode
For additional information on Crestron Connected, visit the Crestron Web
site.
https://www.crestron.com/products/line/crestron-connected
To monitor devices in the system, you can use Crestron RoomView Express
or Crestron Fusion provided by Crestron. You can communicate with the
help desk and send emergency messages. See the following Web site for
details.
http://www.crestron.com/getroomview
This manual describes how to perform operations on your computer using a
Web browser.
gg Related Links
"Setting Up Crestron Connected Support" p.119
"Controlling a Networked Projector Using Crestron Connected" p.119
"Projector Setup Settings - ECO Menu" p.147
"List of Functions" p.10
Setting Up Crestron Connected Support
To set up your projector for monitoring and control using a Crestron
Connected system, make sure your computer and projector are connected to
the network. If you are connecting wirelessly, set up the projector using the
Advanced network connection mode.
a
Press the [Menu] button, select the Network menu, and press [Enter].
b
Select Network Configuration and press [Enter].
c
Select the Others menu and press [Enter].
d
Set the Crestron Connected setting to On to allow the projector to be
detected.
e
When you have finished selecting settings, select Complete and follow
the on-screen instructions to save your settings and exit the menus.
f
Turn off the projector, and then turn it on again to enable the setting.
Controlling a Networked Projector Using Crestron
Connected
Once you have set up your projector to use Crestron Connected, you can
control and monitor projection using a compatible Web browser.
a
Start your Web browser on a computer connected to the network.

Table of Contents

Other manuals for Epson EB-E01

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-E01 and is the answer not in the manual?

Epson EB-E01 Specifications

General IconGeneral
Matrix size0.55 \
Number of colors1.07 billion colors
Native aspect ratio4:3
Projection distance0 - 1.76 m
Vertical scan range100 - 120 Hz
Projection technology3LCD
Supported aspect ratios16:10, 16:9
Contrast ratio (typical)15000:1
Screen size compatibility- \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)2200 ANSI lumens
RMS rated power2 W
FocusManual
Throw ratio1.44 - 1.95:1
Fixed focal length16.7 mm
Lamp typeUHE
Lamp power210 W
Light source typeLamp
Service life of light source6000 h
Service life of light source (economic mode)12000 h
PlacementCeiling, Desktop
Product typeShort throw projector
Product colorWhite
Market positioningPortable
Cable lock slot typeKensington
Built-in displayNo
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)327 W
Power consumption (economy mode)225 W
Video processing10 bit
Video color modesBlackboard, Cinema, Dynamic, Presentation, sRGB
Analog signal format system-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Bundled softwareInhalt DIY-App, Epson Projektor Management, Epson Projektor Professional Tool
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)28 dB
USB display function2 in 1: Image / Mouse
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet84 pc(s)
Quantity per pallet (UK)126 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth237 mm
Width302 mm
Height82 mm
Weight2400 g
Package depth378 mm
Package width329 mm
Package height150 mm
Package weight3500 g

Related product manuals