EasyManuals Logo

Epson EB-E01 User Manual

Epson EB-E01
210 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #163 background imageLoading...
Page #163 background image
Projector Lamp Maintenance
163
The projector monitors the number of hours the lamp is used and displays
this information in the projector's menu system.
Replace the lamp as soon as possible when the following occurs:
The projected image gets darker or quality declines
A message is displayed when you turn on the projector telling you to replace
the lamp (the message is displayed 100 hours before the expected end of the
lamp life and appears for 30 seconds)
The projector's power indicator is flashing blue and its lamp indicator is
flashing orange.
Attention
If you continue to use the lamp after the replacement period has passed, the
possibility that the lamp may explode increases. When the lamp replacement
message appears, replace the lamp with a new one as soon as possible, even if it
is still working.
Do not repeatedly turn off the power and then immediately turn it back on.
Turning the power on and off frequently may shorten the lamp's operating life.
Depending on the characteristics of the lamp and the way it has been used, the
lamp may become darker or stop working before the lamp warning message
appears. You should always have a spare lamp unit ready in case it is needed.
We recommend the use of genuine Epson replacement lamps. The use of non-
genuine lamps may affect projection quality and safety. Any damage or
malfunction caused by the use of non-genuine lamps may not be covered by
Epson's warranty.
gg Related Links
"Replacing the Lamp" p.163
"Resetting the Lamp Timer" p.166
"Projector Specifications" p.194
"Projector Indicator Status" p.169
Replacing the Lamp
You can replace the lamp while the projector is placed on a table or mounted
to the ceiling.
Warning
Let the lamp fully cool before replacing it to avoid injury.
Never disassemble or modify the lamp. If a modified or disassembled lamp is
installed in the projector, it could cause a fire, electric shock, or other damage or
injury.
a
Turn off the projector and unplug the power cord.
b
Allow the projector lamp to cool down for at least one hour.
c
Use the screwdriver included with the replacement lamp to loosen the
screw securing the lamp cover.

Table of Contents

Other manuals for Epson EB-E01

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Epson EB-E01 and is the answer not in the manual?

Epson EB-E01 Specifications

General IconGeneral
Matrix size0.55 \
Number of colors1.07 billion colors
Native aspect ratio4:3
Projection distance0 - 1.76 m
Vertical scan range100 - 120 Hz
Projection technology3LCD
Supported aspect ratios16:10, 16:9
Contrast ratio (typical)15000:1
Screen size compatibility- \
Projector native resolutionXGA (1024x768)
Keystone correction, horizontal-30 - 30 °
Projector brightness (economic mode)2200 ANSI lumens
RMS rated power2 W
FocusManual
Throw ratio1.44 - 1.95:1
Fixed focal length16.7 mm
Lamp typeUHE
Lamp power210 W
Light source typeLamp
Service life of light source6000 h
Service life of light source (economic mode)12000 h
PlacementCeiling, Desktop
Product typeShort throw projector
Product colorWhite
Market positioningPortable
Cable lock slot typeKensington
Built-in displayNo
Power sourceAC
AC input voltage100-240 V
AC input frequency50 - 60 Hz
Power consumption (standby)0.3 W
Power consumption (typical)327 W
Power consumption (economy mode)225 W
Video processing10 bit
Video color modesBlackboard, Cinema, Dynamic, Presentation, sRGB
Analog signal format system-
USB 2.0 ports quantityUSB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
Operating temperature (T-T)5 - 35 °C
Storage relative humidity (H-H)10 - 90 %
Operating relative humidity (H-H)20 - 80 %
Bundled softwareInhalt DIY-App, Epson Projektor Management, Epson Projektor Professional Tool
Noise level37 dB
Country of originPhilippines
Noise level (economic mode)28 dB
USB display function2 in 1: Image / Mouse
Pallet weight0 g
Quantity per pack1 pc(s)
Quantity per pallet84 pc(s)
Quantity per pallet (UK)126 pc(s)
Harmonized System (HS) code85286200
Weight and Dimensions IconWeight and Dimensions
Depth237 mm
Width302 mm
Height82 mm
Weight2400 g
Package depth378 mm
Package width329 mm
Package height150 mm
Package weight3500 g

Related product manuals