29
Installing Batteries in the Remote Control
The remote control uses the two AA batteries that came with the projector.
Warning
Check the positions of the (+) and (–) marks inside the battery holder to
Attention
ensure the batteries are inserted the correct way. If the batteries are not used
Make sure you read the Safety Instructions before handling the batteries.
correctly, they could explode or leak causing a fire, injury, or damage to the
product.
a
Open the battery cover as shown.
c
Close the battery cover and press it down until it clicks into place.
b
Insert the batteries with the + and – ends facing as shown.
To Next Page
Loading...
