Epson EB-X27 User Manual

Indicators Cause Remedy or Status
Power sup
ply
Status Lamp Tempera
ture
Blue - Flash-
ing
State de-
pendant in-
dication
Orange -
Flashing
State de-
pendant in-
dication
Replace Lamp Replace it with a new lamp.
s "Replacing the Lamp" p.148
If you continue to use the lamp after the replacement period has passed, the possibility that the lamp
may explode increases. Replace it with a new lamp as soon as possible.
a
• See the following if the projector is not operating properly, even though the indicators are all showing normal.
s "When the Indicators Provide No Help" p.134
• If the indicators are in a state not shown in this table, stop using the projector, remove the power plug from the electrical outlet, and contact your local dealer or
the nearest address provided in the Epson Projector Contact List.
s Epson Projector Contact List
Problem Solving
133

Epson EB-X27 Specifications

General

Projection Technology	3LCD
Resolution	XGA (1024 x 768)
Contrast Ratio	10, 000:1
Zoom Ratio	1.2x
Throw Ratio	1.48 - 1.77:1
Projection Size	30 - 300 inches
Brightness	2700 lumens
Lamp Life	10, 000 hours (ECO mode)
Keystone Correction	Vertical: ±30 degrees
Inputs	HDMI, VGA, Composite, USB Type A, USB Type B
Dimensions	297 mm x 234 mm x 77 mm