157
When the cleaning cycle is finished, you see a message on the LCD screen.
7. Press the arrow buttons to select Nozzle Check, press the OK button, and press the start button
to run a nozzle check and confirm that the print head is clean.
If you don’t see any improvement after cleaning the print head up to 3 times, turn off the product and wait
at least 6 hours. Then try cleaning the print head again. If quality still does not improve, run a Power
Cleaning. If there is still no improvement, contact Epson support.
Parent topic: Print Head Cleaning
Related tasks
Checking the Nozzles Using the Product Control Panel
Power Cleaning Using the Product Control Panel
Refilling the Ink Tank
Related topics
Loading Paper
Cleaning the Print Head Using a Computer Utility
You can clean the print head using a utility on your Windows or Mac computer.
1. Make sure no product lights are indicating errors.
2. Make sure there are no errors on the LCD screen.
3. Load a few sheets of plain paper in the paper cassette.
4. Do one of the following:
• Windows: Access the Windows Desktop and right-click the icon for your product in the right
side of the Windows taskbar, or click the up arrow and right-click .
• Mac: In the Apple menu or the Dock, select System Preferences. Select Print & Fax, Print &
Scan, or Printers & Scanners, select your product, and select Options & Supplies. Select
Utility and select Open Printer Utility.
5. Select Head Cleaning.
To Next Page
Loading...
