Epson EcoTank M2120 - Resetting Control Panel Defaults; Solving Setup Problems

181
Resetting Control Panel Defaults
If you have a problem with settings on the product control panel, you can reset them to their factory
defaults. You can choose which settings to reset or reset them all.
1. Press the home button, if necessary.
2. Press the arrow buttons to select Settings and press the OK button.
3. Press the arrow buttons to select Restore Default Settings and press the OK button.
4. Select one of these options:
• Network Settings: Resets all network settings.
• Copy Settings: Resets all copy settings.
• Scan Settings: Resets all scan settings.
• Clear All Data and Settings: Resets all settings.
You see a confirmation screen.
5. Press the OK button to reset the selected settings. (Press the stop button if you want to cancel the
operation.)
Parent topic: Solving Problems
Solving Setup Problems
Check these sections if you have problems while setting up your product.