37
Note: If the icon is displayed on the LCD screen, Wi-Fi Direct mode is not enabled. Repeat
these steps to try again.
Parent topic: Wi-Fi Direct Mode Setup
Connecting to a Mobile Device Using Wi-Fi Direct (Simple AP)
You can connect a mobile device directly to the printer without a wireless router or access point.
Note: Make sure the Epson iPrint app is installed on your mobile device before connecting to the printer.
1. Press the home button, if necessary.
2. Select Wi-Fi Setup and press the OK button.
You see a screen like this:
3. Select Wi-Fi Direct and press the OK button.
4. View the information on the following screens and press the OK button as necessary.
5. Do one of the following:
• For iOS devices, select iOS and press the OK button twice. Scan the QR code with the camera
app on your device and follow the instructions on your device. Press the down arrow button to
verify the printer information, and then open the Epson iPrint app on your device and select the
printer displayed on the LCD screen. Press the OK button.
• For Android devices, select Android and press the OK button. Press the down arrow button to
display the printer information. Open the Epson iPrint app on your device and select the printer
displayed on the LCD screen. Press the OK button.
To Next Page
Loading...
