33
6. Enter your wireless password (or network name and then password).
• Press the arrow buttons to highlight a letter or function and press the OK button to select it.
• Press the reset button or select A1# to change the character case or type.
• When you finish entering characters, select OK and press the OK button.
Your product should now display a blue Wi-Fi symbol on the LCD screen.
Note: If the Wi-Fi symbol is not displayed on the LCD screen as shown above, you may have
selected the wrong network name or entered the password incorrectly. Repeat these steps to try
again.
Parent topic: Wi-Fi Infrastructure Mode Setup
Related tasks
Printing a Network Status Sheet
To Next Page
Loading...
