Name: Epson EF12
Brand: Epson
Rating: 5 (1 reviews)

To Next Page

To Previous Page

4. Attach the mounting plate to the projector and secure it in place with the screws that came with the

mounting plate.

Caution: Do not use the feet you removed in step 2 to attach the mounting plate. They could loosen

and cause the projector to fall. Use the screws supplied with the mount plate (M4 × 6 mm max.

depth).

5. Install the projector onto the mounting hardware or a tripod. For details, see the documentation

supplied with the mount or tripod.

Caution: When installing the projector on the mount or tripod, make sure you tighten the screws

securely. If you place the projector upside down, the screws could loosen and the projector could

fall.

When installing the projector in a high location using the safety wire set, make sure you attach the

carabiner to a point that is strong enough to support the weight of the projector and mounting

hardware.

Questions and Answers:

Need help?

Do you have a question about the Epson EF12 and is the answer not in the manual?

Epson EF12 Specifications

General