82
Status indicator Status and solution
Off The projector is in standby or sleep mode. When you press the power
button on the projector or remote, projection begins.
• Make sure that the vents are not clogged with dust or obstructed by
nearby objects.
• If the problem persists, unplug the projector and contact Epson for
help.
Orange Projector is too hot and has turned off.
• Let the projector cool down for at least five minutes
• Make sure that the vents and air filter are not clogged with dust or
obstructed by nearby objects.
• Clean or replace the air filter.
• Make sure the environmental temperature is not too hot.
• If the problem persists, unplug the projector and contact Epson for
help.
Flashing orange One of the following has occurred:
• The laser has a problem
• A fan or sensor has a problem
• An internal projector error has occurred.
Turn the projector off, unplug it, and contact Epson for help.
Note: If the lights display a pattern not listed in the tables above, turn the projector off, unplug it, and
contact Epson for help.
Parent topic: Solving Problems
Related references
Projector Environmental Specifications
Where to Get Help (U.S. and Canada)
Where to Get Help (Latin America)
Related tasks
Cleaning the Air Filter and Vents
To Next Page
Loading...
Need help?
General
