Why are images appearing dark on my Epson EH-TW420?
If images appear dark on your Epson projector: * Adjust the 'Brightness' and 'Brightness Control' settings in the configuration menu. * Adjust the 'Contrast' setting in the configuration menu. * If the lamp is nearing the end of its life, replace it with a new one.
What to do if Epson Projector indicator is orange?
If the indicator light on your Epson projector is lit or flashing orange, it could indicate a High Temp Warning or that the lamp needs replacing. For a High Temp Warning, ensure the air filter and air exhaust vent are clear and that the projector is not against a wall. Clean or replace the air filter if it's clogged. If the Replace Lamp indicator is on, replace the lamp with a new one to avoid the risk of explosion.
Explains safety symbols and their meanings for hazard avoidance.
Details security features like password protection and anti-theft devices.
Explains methods for switching input sources and displaying images.
Details security features to limit access and protect the projector.
Guides on diagnosing and resolving projector issues and error indicators.
Explains the meaning of projector status indicators and their light patterns.
Troubleshooting steps when indicators do not clearly identify the problem.
General| Technology | 3LCD |
|---|---|
| Lamp Life (Normal) | 4000 hours |
| Lamp Life (Eco) | 5000 hours |
| Dimensions | 297 x 234 x 77 mm |
| Noise Level | 37 dB (Normal), 29 dB (Eco) |
| Projection Size | 30 - 300 inches |
| Resolution | 1280 x 800 |
| Contrast Ratio | 15000:1 |
| Keystone Correction | Vertical ±30 degrees |
| Interfaces | HDMI, VGA, USB |
| Input Ports | HDMI, VGA, USB, Composite Video, S-Video |
| Output Ports | VGA |
To Next Page
