Basic Operations
28
Adjusting the Volume
You can adjust the volume by using the buttons on the remote control or the buttons on
the projector's control panel.
Remote control Control panel
c
•
You can also adjust the volume from the configuration menu. s Settings - Audio p.71
•
Under normal conditions, you can adjust the volume of the projector's built-in speaker. However, by
connecting an AV system to the projector and setting HDMI Link to On and Audio Out Device to AV
System, you can adjust the AV system's volume when projecting from HDMI1, HDMI2, and
WirelessHD sources.
s p.59
Caution
Do not start at high volume.
A sudden excessive volume may cause loss of hearing. Always lower the volume before powering off, so
that you can gradually increase the volume when you next turn on the power.
Hiding the Image and Muting the Audio Temporarily
You can use this to temporarily hide the image on the screen and mute the audio.
Press the
button to show or hide the image. The audio is also muted or played.
EH-TW6100W EH-TW6100/EH-TW5950
c
•
For movies, because the movie continues to play even when it is hidden, you cannot return to the point
at which you hid the image and muted the audio using the
button.
•
The button also switches between muting and playing the audio.
•
Under normal conditions, you can adjust the audio of the projector's built-in speaker. However, by
connecting an AV system to the projector and setting HDMI Link to On and Audio Out Device to AV
System, you can adjust the AV system's audio when projecting from HDMI1, HDMI2, and
WirelessHD sources.
s p.59
To Next Page
Loading...
Need help?
Image
Power
Weight and Dimensions
