Epson EH-TW5910 User Manual

Troubleshooting
87
Check Remedy
Is surround sound being output? When audio is output from the projector's speakers, it is also
output from the projector's Optical Audio-Out port in 2ch stereo.
When you want to use surround sound, we recommend con-
necting directly to the source device using an HDMI cable.
Interference or distortion appear in WirelessHD images
Check Remedy
Are signals being received within the Wire-
lessHD transmission range?
Check the range within which the WirelessHD's transceiver can
communicate, and view within that range.
s p.54
Are there any obstructions between the Wire-
lessHD Transmitter and the projector?
Because WirelessHD communicates using a tight beamed elec-
tromagnetic wave, if there are any people or objects and so on
obstructing the communication path, this could have an adverse
affect on the image. Make sure that there are no obstacles be-
tween the WirelessHD Transmitter and the projector within the
WirelessHD transmission range.
s p.54
Is the reception too low? If the transmissions are not strong enough, communication may
be unstable.
Check Reception as you set up the transmitter as it is sometimes
possible to improve the strength of the transmission by moving
the WirelessHD Transmitter or changing its direction.
s Set-
tings - WirelessHD - Reception p.71
Transmission strength may differ depending on the surround-
ings, or they may be unstable. While checking Reception, setup
the transmitter in a location where the number displayed re-
mains steady.
s Settings - WirelessHD - Reception p.71
Problems with USB storage devices
Slideshow does not start
Check Remedy
Is the USB storage device using a security
function?
You may not be able to use USB storage devices that incorporate
security functions.
Other problems
No audio, or the audio is too low
Check Remedy
Is the audio cable connected correctly? Try disconnecting the cable from the Audio (L-R) port, and then
reconnecting.
Is the volume too low? Adjust the volume so that you can hear the audio.
s p.28
Is it connected with an HDMI cable? If no audio is output when connecting via an HDMI cable, set the
connected equipment to PCM output.

Epson EH-TW5910 Specifications

Image

color light output	2, 100 lumen
white light output	2, 100 lumen
resolution	1920 x 1080
contrast ratio	20, 000:1

Optical

projection ratio	1.32 - 2.15:1
projection size	30 inches - 300 inches
projection distance wide	0.9 m - 8.9 m
projection distance tele	1.4 m - 14.5 m

Power

energy use	358 W
economy energy use	274 W
standby energy use	0.35 W

Connectivity

interfaces	RS-232C, VGA in, HDMI 1.4 (2x), Composite in, USB 2.0 Type A, USB 2.0 Type B, Component in
loudspeaker	20 W
stereo	Stereo

Weight and Dimensions

product dimensions	420 x 365 x 137 mm
product weight	6 kg
noise level economy	24 dB (A)