Configuration Menu
66
c
For items adjusted using an adjustment bar, such as the brightness level, you can press the
button while the adjustment screen is displayed to return the adjustment value to its default value.
Configuration Menu Table
If there is no image signal being input, you cannot adjust items related to the image or signal in the
configuration menu. Note that the items displayed for the image, the signal, and other information vary
depending on the image signal being projected.
Image menu
Function Menu/Settings Explanation
Color Mode
Auto, Dynamic, Living Room, Natural, Cinema,
3D Cinema, 3D Dynamic
Select a color mode based on your sur-
roundings and the image you are projec-
ting.
s p.29
Brightness
Adjusts the brightness when the image
appears too dark.
Contrast
Adjusts the contrast between light and
shade in the images. By increasing the
contrast, the images become vivid.
Color Satura-
tion
*1
Adjusts the color saturation for the im-
ages.
Tint
*1
Adjusts the tint for the images.
Sharpness
Standard
Adjusts the image sharpness.
Adjusts the overall image.
Advanced
*1
Thin Line Enhance-
ment, Thick Line En-
hancement, Vert. Line
Enhancement, Horiz.
Line Enhancement
Adjusts the image sharpness.
Use this to adjust specific areas.
s p.36
Abs. Color
Temp.
5000K to 10000K (12 increments) Adjusts the tint for the images. The image
is tinted blue for high values, and tinted
red for low values.
Skin Tone
Adjusts the skin tone. The image becomes
greener when set to a positive value and
redder when set to a negative value.
To Next Page
Loading...
Need help?
Image
Power
Weight and Dimensions
