Configuration Menu
67
Function Menu/Settings Explanation
Advanced
Gamma 2.0, 2.1, 2.2, 2.3, 2.4 Performs gamma adjustments. You can
select a raw value or adjust the gamma
while looking at the image or graph.
s p.33
Customized
Adjust it from the im-
age, Adjust it from the
graph
Reset
RGB Offset R/G/B
Adjusts the offset and gain for each R, G,
and B color.
s p.34
Gain R/G/B
RGBCMY R/G/B/C/M/Y Hue, Satura-
tion, Bright-
ness
Adjusts the hue, saturation, and bright-
ness for each R, G, B, C, M, and Y color.
s p.32
EPSON Super
White
*2
*3
On, Off
(This can only be set when the Color
Mode is set to Auto, Natural, Cinema,
or3D Cinema and when receiving signal
input from the HDMI1 or HDMI2 ports, or
from WirelessHD.)
Set this to On if you are experiencing
bright over exposure of whites in your im-
age. When set to On, HDMI Video Range
settings are disabled.
Power Con-
sumption
Normal, ECO You can set the lamp brightness to one of
two settings.
Select ECO if the images being projected
are too bright. When ECO is selected, pow-
er consumption during projection decrea-
ses, and fan rotation noise is reduced.
Auto Iris
Off, Normal, High Speed You can change the luminance adjust-
ment tracking for changes in brightness in
the displayed image. Set to Off for no lu-
minance adjustment.
s p.37
Reset
Yes, No You can reset all adjustment values for
Image to their default settings.
*1
This is not displayed when a computer image signal is being input.
*2
Settings are saved for each type of input source or signal.
*3
This is only displayed when a Component, HDMI1, HDMI2, or WirelessHD image signal is being input.
(WirelessHD is for EH-TW6100W only.)
To Next Page
Loading...
Need help?
Image
Power
Weight and Dimensions
