Epson EH-TW6000 User Manual

Configuration Menu
60
Function Menu/Settings Explanation
(Advanced)
EPSON Super
White
*2 *6
On, Off
(This can only be set when the Color Mode is set
to Auto, Natural, Cinema, or3D Cinema and
when receiving signal input from the HDMI1 or
HDMI2 ports, or from WirelessHD.)
Set this to On if you are experiencing bright over
exposure of whites in your image. When set to
On, HDMI Video Range settings are disabled.
Overscan
*2 *6
Auto, Off, 2%, 4%,
6%, 8%
Changes the output image ratio (the range of the
projected image).
•
Off, 2 to 8%: Sets the range of the image. Off
projects all ranges. Depending on the image sig-
nal you may notice noise at the top and bottom
of the image.
•
Auto: This can only be set when receiving signal
input from the HDMI1 or HDMI2 ports, or from
WirelessHD. This may be automatically set to
Off or 8% depending on the input signal.
HDMI Video
Range
*1 *2
Auto, Normal, Ex-
panded
(This can only be set when EPSON Super
White is set to Off.)
When set to Auto, the video level for the DVD
input signal to the HDMI1 or HDMI2 ports, or to
the WirelessHD is automatically detected and
set.
If you experience under or overexposure when
set to Auto, set the video level of the projector
to match that of the DVD player's video level.
Your DVD player may be set to Normal or Expand.
The Auto option is not displayed when connec-
ted to a connected device's DVI port.
Reset
Yes, No
Resets all Signal settings except for Aspect to
their default settings.
*1
This is not displayed when a Video image signal is being input.
*2
Settings are saved for each type of input source or signal.
*3
This is only displayed when a PC image signal is being input.
*4
This cannot be set when an HDMI1, HDMI2, or WirelessHD image signal is being input.
*5
This is not displayed when a PC image signal is being input.
*6
This is only displayed when a Component, HDMI1, HDMI2, or WirelessHD image signal is being input.
(WirelessHD is for EH-TW6000W only.)

Epson EH-TW6000 Specifications

General

Matrix size	0.61 \
Projection distance	2.95 - 4.8 m
Projection technology	LCD
Contrast ratio (typical)	-
Screen size compatibility	- \
Projector native resolution	1080p (1920x1080)
Keystone correction, horizontal	± 30 °
Aspect ratio	16:9
RS-232 ports	1
Connectivity technology	Wired
Focal length range	18.2 - 29.2 mm
Aperture range (F-F)	1.51 - 1.99
Lamp type	UHE
Lamp power	230 W
Light source type	Lamp
Service life of light source	5000 h
DVI port	No
AC (power) in	Yes
USB connector type	USB Type-A
Serial interface type	RS-232
USB 2.0 ports quantity	USB 2.0 ports have a data transmission speed of 480 Mbps, and are backwards compatible with USB 1.1 ports. You can connect all kinds of peripheral devices to them.
S-Video inputs quantity	0
Supported video modes	1080p
Supported graphics resolutions	1920 x 1080 (HD 1080)
RMS rated power	20 W
Product color	Black
Market positioning	Home cinema
Power source	AC
AC input voltage	100 - 240 V
Voltage tolerance	10 %
AC input frequency	50 - 60 Hz
Power consumption (standby)	- W
Power consumption (typical)	274 W
Noise level	- dB
Noise level (economic mode)	24 dB

Weight and Dimensions

Weight	6000 g