What does 'Not supported' mean on my Epson ELPLP29?
If your Epson projector displays a 'Not supported' message, check the mode that corresponds to the frequency of the image signals being output from the computer.
Details how to install the projector and set up projection distance for screen size.
Guides on connecting a computer, including compatibility and setup examples.
Details connection methods for projecting computer images using different port types.
Instructions for connecting various video sources like DVD, VHS, and game consoles.
Step-by-step guide to powering on the projector and connected equipment.
Final steps for powering on the projector, including waiting for the indicator light.
Step-by-step instructions for safely powering down the projector.
Guides on adjusting the projected image size and achieving a sharp focus.
Explains how to correct vertical trapezoid distortion in the projected image.
How to choose the correct input source for projection from the projector or remote.
Step-by-step guide on how to navigate and select options within the projector's menus.
Details how to change setting values and select menu items within the configuration menus.
Guides users to check projector indicators when problems occur.
Explains the meaning of different power indicator lights and their causes.
Details the meaning of warning indicator lights (Red, Orange) and their causes.
Provides solutions for when the projector displays nothing on the screen.
Solutions for scenarios where messages appear indicating no image input or support.
Addresses problems with the projected image appearing fuzzy or out of focus.
Solutions for vertical stripes, image distortion, or signal interference.
Solutions for a non-functional remote control or issues with the power-off sequence.
Information on when to replace the lamp and the procedure for replacement.
Final steps for lamp replacement, including securing the cover and resetting time.
To Next Page
General
