Epson EMP-70 - Adjusting Images

32
3.5 Adjusting Images
This section describes how to obtain the best video performance.
See "2. Setup" for details on setting-up position and projection size.
Adjusting the Image Projection Angle
Adjust the projection angle of the projector.
Adjust the projector to face the screen as directly as possible.
1.
Lift the projector to your desired angle of
projection.
2.
Use your fingers to pull up the foot levers.
Front feet emerge.
3.
Release the foot levers.
4.
Make fine adjustments to the height.
Turn the lower portion of the front feet to
make fine adjustments to height.
Point:
Setting back the front feet (see page 36)
Foot Levers
Lower
Raise
EMP‑7050e.book32ページ２００１年１月９日 火曜日 午前９時２５分