Epson EMP-70 - Setting Menu

51
5.5 Setting Menu
Displaying Menus
Press the Menu button, use the Enter button to select "Setting" from the top
menu displayed, and press the Enter button to move to a submenu.
Settings
Menu Content
Keystone If the screen is distorted in trapezoidal form, adjust it to normal display.
* • You can also adjust the screen with the Keystone button on the
projector.
• A keystone correction reduces screen size.
• The keystone correction is stored in memory. You will need to
readjust the image if the projection angle is changed.
• If a keystone correction makes the image noticeably uneven,
reduce the video sharpness with the menu commands Video >
Sharpness.
No-signal/Msg Set the screen display when there is no video signal.
OFF : No message is displayed. (Screen displays black.)
Black : "No-signal" is displayed on a black background (when the
language is English).
Blue : "No-signal" is displayed on a blue background (when the
language is English).
Prompt Set whether the input source currently selected is displayed/not
displayed on the screen.
ON : After input source switching, the input source is displayed for
approximately 3 seconds.
OFF : The input source is not displayed.
-: Broadens upper screen
+: Broadens lower screenNormal screen
EMP‑7050e.book51ページ２００１年１月９日 火曜日 午前９時２５分