Epson EMP-70 - Ending after the Projection

35
3.6 Ending After the Projection
Ending
1.
Press the Power button. A "Power Off"
confirmation message is displayed.
2.
Press the Power button again.
The projector lamp goes out, the operation
display indicator flashes orange, and after
cool-down is complete, the indicator
switches to steady orange.
Point:
If you do not wish to shut the power, press
another button.
Or, if no action is taken, the message disappears
after 7 seconds.
3.
Check that the operation display indicator
lights orange.
Point:
• The flashing orange operation display
indicator indicates that cool-down* (which
takes about 2 minutes) is in progress. Buttons
cannot be operated during cool-down (see
page 74).
• If the power cord plug is pulled out of the
outlet, the operation display indicator will go
out.
Operation display indicator
lights orange.
EMP‑7050e.book35ページ２００１年１月９日 火曜日 午前９時２５分