Epson EMP-70 - Optional Parts

72
8.1 Optional Parts
The accessories shown below are available. Purchase these as your application
requires.
• Replacement Lamp (ELPLP13)
Recommended for purchase before lamp
life expires (screwdriver included).
• Portable screen
50 inch screen: ELPSC06
60 inch screen: ELPSC07
80 inch screen: ELPSC08
• RGB extension cable
ELCCB05: 5m
ELCCB10: 10m
Use if the computer cable included is not
long enough.
(For mini D-sub 15-pin/mini D-sub 15-
pin)
• Soft carrying case
(ELPKS16, ELPKS24)
Used for projector transport.
• PC selector (ELPST01)
Use when multiple RGB signal sources
are being used.
• Image Presentation Viewer
(ELPDC01, ELPDC02, ELPDC03)
For use with paper, OHP copy, or in slide
projection.
• Computer Cable
ELPKC02: 1.8m
ELPKC09: 3.0m
ELPKC10: 20m
Use if the computer cable included is not
long enough.
(For mini D-sub 15-pin/mini D-sub 15-
pin)
• Mac Adapter Set (ELPAP01)
For use in connecting the projector to a
Macintosh computer.
• Component Video Cable
(ELPKC19: 3.0m)
(For Mini D-Sub 15-pin/RCA)
• D terminal cable
(ELPKC22: 3.0m)
(For D-sub 15/D terminal)
EMP‑7050e.book72ページ２００１年１月９日 火曜日 午前９時２５分