Epson EMP-70 - Page 36

34
Adjusting Images (Remote Control Only)
[Optimizing Computer Video (Using the Auto button)]
This function applies automatically optimized adjustment values to a
computer input signal.
If the input is a video signal, this function does not operate.
Adjusted values set automatically are "Tracking", "Position (vertical and
horizontal)", and "Sync".
Point:
• This function cannot optimize the adjustment
for some signal types. In these cases, use the
Video Menu commands to perform adjustment
(see page 47).
• When functions such as E-Zoom or A/V muting
are engaged, press the Auto button to
disengage these functions before adjustment.
[Opening a Menu For Adjustment]
Press the Menu button and perform adjustment using the Video Menu.
For details, refer to "Menu Screen Operations (Remote Control Only)" (see
page 45).
Adjusting the Volume (Remote Control Only)
Press the Volume +, - button to adjust the volume to an easily audible listening
level.
Point:
Adjustment is not available if there is no audio
signal.
EMP‑7050e.book34ページ２００１年１月９日 火曜日 午前９時２５分