Monitoring window layout
30
When Log output is set to On at Environment setup in the Tool menu,
transmission logs are stored. The default setting is Off.
Displaying logs
Procedure
Select "Log" - "View" from the View menu.
The web browser will open and the communication logs up until that
time will be displayed.
Deleting logs
Procedure
Select "Log" - "Delete" from the View menu. When the confirma-
tion message is displayed, click "OK".
All logs will be deleted and details of EMP Monitor control operations
and details of projector errors from that point onward will be recorded in
a new log.
To Next Page
Loading...
