EasyManua.ls Logo

Epson EMP-S3L - Specifications

Epson EMP-S3L
83 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
74
Specifications
* The USB interface complies with the USB 1.1 standard.
The USB connector is not guaranteed to operate correctly with all USB-
compatible devices.
Angle of tilt
If you set the projector higher than 30º, it could damage the projector and
cause an accident.
Product name PowerLite S3
Dimensions 327 (W) × 86 (H) × 246 (D) mm (not including feet)
Panel size 0.5 inches
Display
method
Polysilicon TFT active matrix
Resolution SVGAg 480,000 pixels (800 (W) × 600 (H) dots) × 3
Focus
adjustment
Manual
Zoom
adjustment
Electronic (approx. 1:1.35)
Lamp
(light source)
UHE lamp, 135 W, Model No.: ELPLP33
Max. audio
output
1W monaural
Speaker 1
Power supply 100-240VAC 50/60Hz 1.0-2.2A
Power Consumption
Operating: 200W(100 to 240 V area)
Standby : 4.8W(100 to 240 V area)
Operating
temperature
+5º– +35ºC (41º–95ºF ) (No condensation)
Storage
temperature
-10º– +60ºC (14º–140ºF ) (No condensation)
Weight Approx. 2.5 kg
Connectors Computer: 1 Mini D-Sub 15-pin
(female) Blue
S-Video: 1 Mini DIN 4-pin
Video: 1 RCA pin jack
Audio Input: 1 RCA pin jack×2 (L,R)
USB*: 1 USB connector (B series)
Monitor Out : 1 Mini D-Sub 15-pin
(female) Black
Safety
USA
UL60950 Third Edition
Canada
CSA C22.2 No.60950
European Community
The Low Voltage Directive
(73/23/EEC)
IEC60950 3
rd
Edition
EMC
USA
FCC Part 15B Class B (DoC)
Canada
ICES-003 Class B
European Community
The EMC Directive
(89/336/EEC)
EN55022, 1998 Class B
EN55024, 1998
IEC/EN61000-3-2
IEC/EN61000-3-3
Australia/New Zealand
AS/NZS CISPR 22:2002 Class B
Pixelworks DNX
TM
ICs are used in this Projector.
0°- ±30° 0°- ±30°
0°- ±30° 0°- ±30°

Table of Contents

Related product manuals