Meanings of symbols used
The following table shows the symbols used in this manual, along with descriptions of what they mean.
Attention
Indicates procedures which may result in damage or injury if sufficient care is not taken.
q
Indicates additional information and points which may be useful to know regarding a topic.
s
Indicates a page where detailed information regarding a topic can be found.
Procedure
Indicates operating methods and the order of operations.
The procedure indicated should be carried out in the order of the numbered steps.
[ (Name) ] Indicates the name of the buttons on the remote control or the control panel.
Example: [Esc] button
"(Name)"
Timer
Indicates the name of the buttons or items on EMP Monitor.
Example: Select "Timer" - "Timer Settings".
Select Timer - Timer Settings.
To Next Page
Loading...
