q
• Some connected projectors may not be equipped with all of the
above ports or functions. If you click a button for a port or
function that is not available, nothing will happen.
• You can select objects to be controlled and use the control
buttons to carry out control operations even when the following
are being displayed.
Group properties s p.26
Projector properties s p.26
Warning and Error Projector list
(Control operations can only be carried out for projectors with a
warning status.) s p.24
Carrying out control using a web browser (Web
control)
You can use the computer's web browser to change the configuration
menu settings for projectors.
Procedure
A
Right-click on the icon of a projector to be controlled in
Grouping view or Detail list view and select "Web control".
B
The web browser will open and the Web control window
will be displayed.
Web control lets you set the same details as the configuration menu for
the projector.
s Projector's User's Guide
q
You can select projectors and right-click on them to select Web
control even when the following are being displayed.
Group properties s p.26
Warning and Error Projector list (Control operations can only be
carried out for projectors with a warning status.) s p.24
Carrying out control using timer settings
This is useful for carrying out certain control operations such as
turning a projector's power on and off at specified times every day or
every week.
Timer settings can be carried out either for a single projector only, or
all at once for all projectors in a group.
Procedure
Select "Timer" - "Timer Settings" from the Tool menu.
The following window will be displayed and you can then check the
timer setting status.
Using the control functions
29
To Next Page
Loading...
