Epson EPL-6200 - Option ROM Error; EEPROM Error

EPSON EPL-6200/EPL-6200L Revision A
Troubleshooting Troubleshooting When There is Error Display 114
3.2.14 Option ROM Error
This error is an optional ROM fault.
3.2.15 EEPROM Error
This error is an EEPROM fault.
Table 3-17. Troubleshooting for “Option ROM Error”
Step Action and Question Yes No
Parts below can be the source of this error (Chapter 4 Disassembly and Assembly)
• Main Board Assy (C533/C534 Main) (p.146)
1
Main Board Assy.
1. Replace the Main Board Assy.
♦Does the error still occur?
Go to “3.4.2
Electrical
Noise”
(p.120)
Replace the
Main Board
Assy.
C H E C K
P O I N T
EPL-6200/EPL-6200L is not available with any optional ROM and
is not equipped with any free slot for optional ROM.
Table 3-18. Troubleshooting for “EEPROM Error”
Step Action and Question Yes No
Parts below can be the source of this error (Chapter 4 Disassembly and Assembly)
• Main Board Assy (C533/C534 Main) (p.146)
1
EEPROM
Initialize EEPROM and check the operation.
♦Does the error still occur?
Go to Step 2
Problem
solved
2
Main Board Assy.
1. Replace the Main Board Assy.
♦Does the error still occur?
Go to “3.4.2
Electrical
Noise”
(p.120)
Replace the
Main Board
Assy.
C H E C K
P O I N T
How to initialize EEPROM is as follows:
 EPL-6200:
Turn on the power while pressing “Start/Stop” + “Job Cancel”
+ “Information”.
 EPL-6200L: (On the screen “Optional Settings” of printer
driver)
Click the left button of the mouse while pressing
[ALT]+[CTRL] +[SHIFT]+[W].
(For details, refer to “EEPROM Initialization
(p.54)”)