Epson EPL-6200 - Motors

EPSON EPL-6200/EPL-6200L Revision A
Troubleshooting Troubleshooting for Electrical Parts 122
3.5.5 Motors
Table 3-32. Troubleshooting for Motors 1
Step Check Item Solution
1
Is the LOCK signal on Control Board “H” when the
printer is standing by?
No : Replace the Control
Board
Replace the motor
2
Does the REM signal on Control Board turn H→L
when the motor is turned on?
Yes: Replace the motor
No : Replace the Control
Board
Table 3-33. Troubleshooting for Motors 2
Step Check Item Solution
1
Does the input signal to Control Board turn H→L
when the motor is turned on?
(The input signal varies with the direction of rotation.)
Yes: Replace the motor
No : Replace the Control
Board
Table 3-34. Troubleshooting for Motors 3
Step Check Item Solution
1
Are the relay connector of the motor and the print jack
on Control Board connected properly?
Yes: Replace the motor or
Control Board
No : Connect the
connector and print
jack properly