Epson ET-2870 Series - Selecting Recipients

“Placing Originals on the Scanner Glass” on page 38
“Placing Originals on the ADF” on page 37
2. Select Fax on the printer's control panel.
To select an item, use the
u d l r buttons, and then press the OK button.
3. Specify the recipient.
“Selecting Recipients” on page 102
4. Select Menu by pressing the OK button, and then select Scan Settings or Fax Send Settings to make settings
as necessary such as the resolution and the sending method.
“Scan Settings” on page 108
“Fax Send Settings” on page 109
5.
Press the
x button to send the fax .
Note:
O If the fax number is busy or there are some problems, the printer automatically redials aer one minute.
O To cancel sending, press the
y button.
O It takes longer to send a fax in color because the printer performs scanning and sending simultaneously. While the
printer is sending a fax in color, you cannot use the other features.
Selecting Recipients
You can specify recipients to send the fax using the following methods.
Entering Fax Number Manually
Press the fax number with the number buttons, and then press the OK button.
- To add a pause (pause for three seconds during dialing), press the
d button.
- If you have set an external access code in Line Type, enter "#" (hash) instead of the actual external access code at
the beginning of the fax number.
Note:
If you cannot manually enter a fax number, Direct Dialing Restrictions in Security Settings is set to On. Select fax
recipients from the contacts list or the sent fax history.
Faxing > Sending Faxes Using the Printer > Selecting Recipients
102