Epson ET-2870 Series - Receiving Faxes on the Printer; Receiving Incoming Faxes

2. Select Fax on the home screen.
To select an item, use the
u d l r buttons, and then press the OK button.
3. Specify the recipient.
4.
Press the OK button, and then select Scan Settings.
5. Select ADF Continuous Scan, and then select On.
You can also make settings such as the resolution and the sending method in Scan Settings or Fax Send
Settings if necessary.
6. Press the
button until you are returned to the Fax screen, and then press the x button.
7. When scanning the rst originals is complete and the message Send another page? is displayed on the control
panel, select Ye s , load the next originals, and then press the
x button.
Note:
If you leave the printer untouched for 20 seconds aer prompted to set the next originals, the printer stops storing and
starts sending the document.
8. When sending is complete, remove the originals.
Receiving Faxes on the Printer
If the printer is connected to the phone line and basic settings have been completed using the Fax Setting Wizard,
you can receive faxes.
Received faxes are printed.
When you want to check the status of the fax settings, print a Fax Settings List by selecting Fax > Menu > More >
Fax Report > Fax Settings List.
Receiving Incoming Faxes
ere are two options in Receive Mode.
Related Information
& “Usage of Manual Mode” on page 106
& “Usage of Auto Mode” on page 106
& “Receive Mode:” on page 264
Faxing > Receiving Faxes on the Printer > Receiving Incoming Faxes
105