Epson ET-2870 Series - Setting Up a WSD Port

2. Select Scan on the control panel.
To select an item, use the
u d l r buttons, and then press the OK button.
3. Select To WSD.
4. Select a computer.
5. Press the
x button.
Setting Up a WSD Port
is section explains how to set up a WSD port for Windows 7/Windows Vista.
Note:
For Windows 10/Windows 8.1/Windows 8, the WSD port is set up automatically.
e following is necessary to set up a WSD port.
O e printer and the computer are connected to the network.
O
e
printer driver is installed on the computer.
1. Turn the printer on.
2. Click start, and then click Network on the computer.
3. Right-click the printer, and then click Install.
Click Continue when the User Account Control screen is displayed.
Scanning > Scanning Originals Using WSD > Setting Up a WSD Port
84