Epson ET-2870 Series - Page 135

1. Turn o the printer by pressing the P button.
2. Make sure the power light turns
o,
and then unplug the power cord.
c
Important:
Unplug the power cord when the power light is
o.
Otherwise, the print head does not return to the home
position causing the ink to dry, and printing may become impossible.
3.
Disconnect all cables such as the power cord and USB cable.
4. Remove all of the paper from the printer.
5. Make sure there are no originals on the printer.
!
Caution:
Be careful not to trap your hand or ngers when opening or closing the scanner unit. Otherwise you may be
injured.
6. Make sure to install the cap onto the ink tank securely.
7. Close the ink tank cover securely.
Maintaining the Printer > Transporting and Storing the Printer
135